Shop Now!
 


We take all the guess work out, sell what Works, and Ship World Wide!

DRD 914 2.0

DRD 914 2.0 replica heads 

Our price: $1499.99
DRD L914 2.0

DRD L914 2.0 replica heads 

Our price: $1999.99
Stuska Engine dyno for sale
tuska model 400 engine dyno for sale:
For sale , used stuska model 400 engine dyno, made by stuska, sold configured for vw applications.
Engine dyno was rebuilt a few years back, replaced all bearings and seals. Includes, control console, rpm, dyno gauges, oil pressure, boost, fuel pressure gauges. Invovate 02 meter and wand, Holley electric fuel pump and regulator, 5 gallon gas tank, AN gas and oil lines, oil filter. Includes, battery and hi torque starter. We used this unit for years to test engines with, bolt on an engine and start tested. Includes operations manual, will run off normal garden hose water supply.
Needs to cleaned up, dusty, it has been setting collecting dust. Must sell as we need to make room for more equipment.
$4500.00. Local pickup, or Item can be crated and shipped worldwide for a additional cost
Our price: $5000.00
Dual 34 ICT redline weber kits, type 1 (Dual Port)

Dual 34 ICT redline weber kits, type 1

Our price: $419.99
Market price: $439.99 save 5%
DRD D7000 Type 1 CNC Ported Heads 94mm

DRD D7000 Type 1 Cylinder Heads, Made in the USA

Our price: $999.99
Type 1 Idf/ DEll offset Manifolds set

New Type 1 Idf/ DEll Manifolds set, includes 2 offset manifolds, gaskets and hardware kit.

Our price: $99.99
Aluminum stroker raised roof type 1 race case, 94mmX8mm studs

Engine Case, Aluminum HD stroker

Our price: $849.99
Market price: $999.99 save 15%
Wiseco Flat top 94mm piston kits
type 1 Flat top 94mm B, stroker, Wiseco piston kit, includes, rings, pins, sprial lock clips kit. Demand the best for your engine. 94mm B configuration only. Set of 4 .
Our price: $399.99
DRD D7000 Type 1 CNC Ported Heads 90.5-92mm (Turbo)

DRD D7000 Turbo Type 1 Cylinder Heads, Built  in the USA

Our price: $1039.99
Type 4 Stroker KB 96mm x78-80mm, piston kit

Type 4 Stroker Keith Black 96mm x78-80mm hyperputectic piston kit. Pistons have 22mm wrist pin to be used with vw type1 connecting rods. Compressed piston height is 1.110. Includes , 4 pistons, pins, clips, ring kit. Cylinders are not included.

Our price: $249.99
Pauter Type1 Rocker arm kit, 1.40ratio

Type 1 Pauter roller rockers, 1.4 ratio , simply the best rocker avaible. Includes 2 complete rockers units, new rocker studs and nuts, for 2 heads. Sold as complete kitAs of 2012 forward, pauter rockers will come with bronze bushing on the rocker arm to shaft assembly. The neddle bearings have been eliminated. .

Our price: $499.99
Dual EMPI EPC 48mm IDA Carb Kit, Calibrated (with 3rd progression hole)

Dual EMPI EPC 48mm IDA Carb Kit, Calibrated (with 3rd progression hole)

Our price: $799.99
Market price: $899.99 save 11%
DRD 40X35.5mm Performance Big Valved heads, 94mm bore (Built in the USA) (Dual Spring)

DRD 40X35.5mm Performance Big Valved  heads,

Our price: $514.99
Market price: $539.99 save 5%
DRD 42X37.5mm Performance Big Valved heads, 94mm bore (Built in the USA) (Dual Spring)

DRD 42X37.5mm Performance Big Valved  heads, 94mm bore

Our price: $529.99
Market price: $569.99 save 7%
DRD 44X37.5mm Performance Big Valved heads, 90.5-92 mm bore (Built in the USA) (Dual Spring)

DRD 44X37.5mm Performance Big Valved  heads, 90.5-92mm bore

Our price: $539.99
Market price: $559.99 save 4%
DRD L5 TURBO , CNC ported type1 heads, 94mm bore (Built in the USA)

DRD L5 CNC TURBO, CNC ported type1 heads, 94mm bore

Our price: $769.99
Market price: $809.99 save 5%
DRD Street Master Type 1 2276CC Engine Parts Kit (160 Horse Power)

DRD 2276CC  Engine parts kit  (160 Horse Power) 

Our price: $3599.99
Shadeck 30mm type 1 oil pump, Modified for Type 4 engines
Schadeck 30mm oil pump, Modified for Type 4 engines
Our price: $75.99
Dual 44mm webers calibrated (Type 1 )

Dual 44mm webers calibrated

Our price: $849.99
DRD L3 Heads ( Built in the USA)

DRD L3 Heads Type 1, 35.5mX32mm heads

Our price: $499.99
Market price: $539.99 save 7%
DRD L5 CNC ported type1 heads (94mm bore) (Built in the USA)

DRD L5 CNC ported type1 heads

Our price: $749.99
Market price: $799.99 save 6%
DRD L6 CNC ported type1 heads (94mm bore) (Built in the USA)

DRD L6 CNC ported type1 heads

Our price: $849.99
Market price: $899.99 save 6%
DRD L7 CNC ported type1 heads (94mm bore) (Built in the USA)

DRD L7 CNC ported type1 heads

Our price: $899.99
Market price: $949.99 save 5%
DRD Type 4 , 2056CC parts kit (Keith Black Pistons)

DRD Type 4 , 2056CC  parts kit

Our price: $1449.99
DRD Spring Loaded push rod tubes
DRD Spring Loaded push rod tubes
Our price: $73.99